Textile Fluorescent

Textile Fluorescent is a polyester-based fluorescent trim material used as a high-visibility component rather than a full garment shell. It is used for workwear edging, safety-vest trim, pocket and seam accents, bags, uniforms, patches and other products that need strong daytime color contrast.

Color Fastness

Light fastness and dry-rubbing fastness are both Grade 4+. For binding edges, straps and garment trim exposed to daylight and frequent rubbing against gloves, bags or outer layers, these ratings give a practical measure of shade retention and resistance to noticeable color transfer.

Webbing Strength

At 25 mm width, the webbing exceeds 800 N tensile strength. It can be used for adjustment tabs, edge binding and reinforcement strips that take routine pulling during garment or bag handling. It remains a trim component and is not certified fall-arrest or life-safety webbing.

Formaldehyde and Dry-Cleaning Fastness

Formaldehyde content is below 20 ppm, and dry-cleaning color fastness is Grade 4+. These values are relevant for workwear trims used close to clothing-contact areas and for products that go through commercial garment-care processes.

Product Form and Size

The material can be supplied as polyester webbing, binding tape or thin woven fabric. Webbing can be specified from 10 to 50 mm wide, with an approximate thickness of 0.5-1.2 mm.

Fluorescent Color

Fluorescent yellow and orange-red are the standard high-visibility color directions. Production shade is matched against an approved lab dip or reference sample.

Branding Options

Logos and repeating identification marks can be woven or printed into the trim. Artwork size is adjusted to the selected tape width.

• Before dyeing or printing, webbing and woven bases are checked for width, thickness, weave consistency, straight edges and stable roll tension. Fluorescent lots are then matched against the approved shade standard under controlled lighting to reduce visible roll-to-roll variation.
• Representative samples are checked against the approved construction and shade specification. Any chemical-control items included in the order requirements are also verified before the lot is released.
• Before shipment, every finished roll is checked for width deviation, dye streaks, broken yarns, print defects, frayed edges and roll presentation. The inspection is carried out at the packing stage for all finished rolls.

Hot Tags: textile fluorescent, China textile fluorescent manufacturers, suppliers, factory, fluorescent fabric, Fluro Fabric, Textile Fluorescent