Product Overview
Tent Roof Material is a stretch Oxford fabric for the upper panels of tents, canopies, rooftop shelters and event structures. It is intended for overhead areas that are exposed to direct sunlight and intermittent rain.
Key Data Table
| Specifications | Value |
| Fabric | 300D Stretch Oxford Fabric |
| Basis weight | 150 g/m² (±5 g) |
| UV protection (UPF) | 50+ |
| UVA transmittance | <1% |
| Water pressure resistance (hydrostatic pressure) | 1000 mm H₂O |
Key Advantages
300D Stretch Oxford with Controlled Basis Weight
The Key Data Table lists 300D Stretch Oxford Fabric at 150 g/m2 (+/-5 g). For large roof and canopy panels, that specification provides the woven structure needed for tensioning while keeping the finished fabric weight within a stated tolerance from roll to roll.
UPF 50+ UV Protection
UPF is listed at 50+, with UVA transmittance below 1%. This is the relevant specification for roof panels on rooftop tents, camping shelters and event canopies that may be installed in open sun without additional shade.
1,000 mm Hydrostatic Pressure Resistance
Hydrostatic pressure resistance is 1,000 mm H2O. The figure sets the fabric-level water-resistance target for roof panels used in intermittent rain or other short periods of wet weather.
Customization Capability
Fabric and Weight Matching
Fabric construction and finished basis weight can be matched to an approved technical requirement or a confirmed reference sample for the roof project.
UV and Weather Target
UPF, UVA transmittance and water-pressure targets can be treated as control items during sampling and production approval.
Appearance and Roll Preparation
Color, print artwork, roll format, labeling and export packing can be prepared to the final roof-fabric specification.
Quality Control
- Production checks first confirm the approved fabric construction and finished basis weight. Functional test results are then reviewed against the order requirements.
- For this roof material, the main Key Data Table checks are UPF, UVA transmittance and hydrostatic-pressure resistance, using the methods agreed for the project.
- Before packing, rolls are checked for weaving defects, shade variation, surface marks, edge condition, usable length and correct labels. A third-party release inspection can be accepted when the buyer requests external verification.
Products Description
Q: How is Tent Roof Material packed for export?
A: Export packing is prepared around the required roll protection, labels and shipment specification.
Q: Which shipping term is supported?
A: FOB is supported.
Q: Does UPF 50+ replace water-resistance testing?
A: No. UPF and water resistance are separate performance items and need separate testing.
Q: Is the listed 150 g/m2 value the weight of a finished tent roof?
A: No. The 150 g/m2 figure is the fabric basis weight shown in the Key Data Table, not the weight of a finished tent roof.
Hot Tags: tent roof material, China tent roof material manufacturers, suppliers, factory, Blackout Tent Fabric, Camping Tent Fabric Material, Heavy Duty Tent Material, Printed Tent Cloth, PVC Tent Fabric, Roof Top Tent Fabric
