Outdoor Tent Fabric

Outdoor Tent Fabric
Product Introduction:
This product is for mountaineering, trekking, and four season tents. These tents face wind, rain, snow, and strong sun. The fabric must do many jobs at once. It must block water, let sweat vapor out, resist wind, and stop UV rays. We use 70D nylon with a PTFE membrane for this product. The base is 70D×70D nylon ripstop.
Send Inquiry
Description
Technical Parameters

All Weather Protection for Serious Campers

 

This product is for mountaineering, trekking, and four season tents. These tents face wind, rain, snow, and strong sun. The fabric must do many jobs at once. It must block water, let sweat vapor out, resist wind, and stop UV rays. We use 70D nylon with a PTFE membrane for this product. The base is 70D×70D nylon ripstop. The weight is 55 grams per square meter. The inside has a microporous PTFE membrane. Each pore is 0.1 to 0.3 microns wide. Liquid water cannot pass through a pore that small. But water vapor molecules are smaller. They can escape. The outside has a C6 fluorocarbon water repellent treatment. The total weight with the membrane is 85 grams per square meter. We call this product Outdoor Tent Fabric. It is designed for harsh conditions.

Key Data Table

Property

Value

Base Fabric

70D×70D nylon ripstop

Weight

55 g/m²

Membrane

Microporous PTFE

Total Weight with Membrane

85 g/m²

Water Resistance

10000 mm H₂O (ISO 811)

Breathability (B1 method)

12000 g/m²/24h (JIS L1099)

Air Permeability

<0.1 cm³/s/cm² (ASTM D737)

Tensile Strength (Warp / Weft)

550N / 500N

UV Aging (300h QUV)

>85% strength retained

Fold Durability

100 folds, no membrane crack

Water Contact Angle

>110 degrees

 

Breathable, Windproof, and Long Lasting

 

This Outdoor Tent Fabric stops wind almost completely. The air permeability is less than 0.1 cubic centimeters per second per square centimeter. Wind does not go through. But the fabric lets sweat vapor escape. That is very important for high altitude camping. If vapor cannot escape, condensation forms inside the tent. Then your sleeping bag gets wet. With our fabric, you stay dry from both sides. The PTFE membrane does not crack after repeated folding. We test it for 100 folds. The membrane stays intact. The fabric is also light. A full tent packs down to a small size. That is good for long hikes. We also test UV aging. After 300 hours of QUV, the fabric keeps over 85% of its strength. The water contact angle stays above 110 degrees. Rain drops roll off.

 

A Mountaineering Brand Tested It at 5000 Meters

 

4ec5802d-251e-4e6e-96e5-d55057f0c145

A mountaineering gear brand used this Outdoor Tent Fabric for an expedition tent. They tested it at 5,000 meters altitude. It snowed outside. The inside of the tent stayed dry. There was no condensation. The brand owner told us, "The breathability is much better than our old PU coated fabric." Our factory has 12 years of experience. We have an R&D team. We support small batch custom orders. We also support OEM and ODM. You can send us a drawing or a sample. We will make it for you. Free samples are available for regular products. We accept third party inspection. Payment is 30% deposit and 70% balance for regular orders. Custom orders require 50% deposit. FOB shipping. Try this fabric for your high end tent line.

 

Hot Tags: outdoor tent fabric, China outdoor tent fabric manufacturers, suppliers, factory

Send Inquiry
you dream it, we design it
Committed to providing high-quality functional fabrics for global customers
contact us